블로그 약 Steel Buildings Boost Seismic Resilience with Braced Dual Systems

The field of earthquake engineering has witnessed a profound transformation in structural design philosophy—from an emphasis on sheer strength to ductile design, and now to resilient seismic design. As urbanization accelerates globally, megacities like Vancouver, Tokyo, and San Francisco, situated along the Pacific Ring of Fire, face dual threats from crustal earthquakes and subduction zone earthquakes.

The traditional passive defense paradigm—relying on increased structural stiffness to resist seismic forces—often results in brittle failure or severe residual deformation during strong earthquakes. This approach not only causes significant economic losses but fails to meet modern society's demand for rapid post-earthquake recovery.

Active resilience focuses on optimizing structural systems to achieve effective energy dissipation and controlled damage progression. The braced dual system, which combines the high stiffness of concentrically braced frames (CBF) with the ductility of moment-resisting frames (MRF), has emerged as a cornerstone of contemporary high-rise seismic design. This article examines the system's mechanical principles, performance metrics, and engineering applications through high-precision numerical simulations using the OpenSees platform.

Vancouver's location near the Cascadia Subduction Zone presents unique seismic complexities, exposing structures to both high-frequency crustal earthquakes and long-duration subduction zone events.

• Concentrically Braced Frames (CBF): While effective at controlling inter-story drift during moderate earthquakes, CBFs suffer from sudden strength degradation after brace buckling, creating weak-story mechanisms and exhibiting brittle behavior during major seismic events.
• Moment-Resisting Frames (MRF): Though highly ductile through beam-end plastic hinge formation, pure MRFs often fail to meet stiffness requirements for tall buildings, resulting in excessive displacements that damage non-structural components.

The braced dual system establishes dynamic equilibrium between stiffness and ductility. During minor earthquakes, braces provide primary lateral resistance; during major events, frames absorb energy through plastic deformation while braces prevent global instability.

The study evaluated an 8-story Vancouver office building prototype designed according to NBCC 2015 and CSA/S16-14 standards.

Using OpenSees, researchers implemented fiber models to capture plastic section behavior and incorporated P-Delta effects for geometric nonlinearity.

The study employed two earthquake record sets: near-field pulse-type waves for crustal earthquakes and long-duration waves for subduction zone events. Nonlinear time history analyses compared three systems (MD-CBF, MD-MRF, and braced dual system).

Results demonstrate significant resilience improvements:

The dual system exhibits progressive damage sequencing—braces yield first, followed by frame plastic hinge formation—distributing damage evenly across building height rather than concentrating at weak stories.

The system reduces displacement responses by 30-40% compared to CBFs. When braces buckle, frames immediately assume load, creating redundancy that maintains structural integrity beyond design-level earthquakes.

The system's collapse margin ratio (CMR) significantly exceeds single systems, reducing collapse probability by nearly 50% during extreme subduction zone earthquakes.

The dual system achieves uniform damage distribution vertically, eliminating dangerous weak-story mechanisms.

Fragility curves show the dual system requires substantially higher seismic intensity to reach collapse prevention (CP) states compared to conventional systems.

The system maintains structural integrity at twice the seismic demand that would compromise traditional systems.

• Future design codes should consider earthquake duration alongside peak ground acceleration
• Lifecycle cost analysis justifies the system's slightly higher construction costs through reduced repair expenses
• The system offers an optimal solution for high-seismic regions, balancing stiffness, strength, and ductility

The shift from passive defense to active resilience represents both technological progress and a redefinition of urban safety responsibility. As advanced materials and smart monitoring technologies evolve, buildings may transform from earthquake victims to resilient structures capable of self-regulation during extreme events.